Filter
Top Products
1. NEVER REMOVE STEERER TUBE FROM CROWN. THIS IS A PRESSED IN PART. REMOVING IT WILL
RENDER BOTH THE CROWN AND STEERER TUBE INOPERABLE.* MAKE SURE THE FORK CAPS AND ALL
FORK HARDWARE (brake bolts, pinch bolts, etc.) ARE TIGHT BEFORE EACH RIDE.
2. DO NOT PERFORM ANY MODIFICATIONS OR ADJUSTMENTS THAT ARE NOT OUTLINED IN THIS
MANUAL. SEE THE TUNING SECTION FOR MORE DETAILS.
3. INSPECT YOUR FORK BEFORE EVERY RIDE. INSPECT THE CROWN, TUBES, AND AXLE SEAT AREAS FOR
ANY SIGNS OF FATIGUE, BENDING, CRACKING OR OTHER DAMAGE. IF YOU NOTICE ANY TYPE OF
DAMAGE, DO NOT RIDE IT. RETURN IT TO YOUR DEALER OR TO WHITE BROTHERS FOR A COMPLETE
INSPECTION AND NECESSARY REPAIR.
4. PERFORM ALL RECOMMENDED MAINTENANCE ACCORDING TO THE MAINTENANCE SECTION OF THIS
MANUAL. FAILURE TO PERFORM MAINTENANCE COULD DRASTICALLY REDUCE THE FORK’S LIFE,
PERFORMANCE AND CAUSE YOUR FORK TO BE A SAFETY HAZARD.
5. WHITE BROTHERS RECOMMENDS THAT YOU WEAR PROPER SAFETY EQUIPMENT EVERY TIME YOU
RIDE, INCLUDING APPROVED BICYCLE HELMET. NEVER RIDE AT NIGHT WITHOUT LIGHTS.
6. ALWAYS USE GENUINE WHITE BROTHERS PARTS. USE OF AFTERMARKET REPLACEMENT PARTS AND
UPGRADES VOIDS THE WARRANTY AND COULD CAUSE STRUCTURAL FAILURE.
7.WHITE BROTHERS FORKS ARE DESIGNED FOR OFF ROAD USE ONLY. THEY ARE NOT EQUIPPED WITH
REFLECTORS FOR ROAD USE. IF YOU ARE GOING TO USE YOUR FORK ON THE ROAD, HAVE A DEALER
OR MECHANIC INSTALL REFLECTORS THAT MEET THE CONSUMER PRODUCT SAFETY COMMISSION’S
REQUIREMENTS.
*IF SERVICE BECOMES NECESSARY OR REMOVAL OCCURS, PLEASE CALL WHITE BROTHERS CUSTOMER SERVICE FOR PRODUCT
EVALUATION AND DIAGNOSIS.
TABLE OF CONTENTS
SAFETY.......................................................PAGE 2
INTRODUCTION........................................PAGE 2
FORK INSTALLATION..............................PAGE 3
TUNING.......................................................PAGE 4
MAINTENANCE........................................PAGE 5
TROUBLE SHOOTING..............................PAGE 6
EXPLODED VIEWS..................................PAGE 7
WARRANTY...............................................PAGE 8
INTRODUCTION
WARNING: RIDING A BIKE IS DANGEROUS. NOT PROPERLY MAINTAINING OR INSPECTING YOUR BIKE AND
IT’S COMPONENTS IS EVEN MORE DANGEROUS. IT IS ALSO DANGEROUS TO NOT READ AND FOLLOW
THESE INSTRUCTIONS.
Thank you for purchasing your new White Brothers fork. Our forks are designed to help you perform at your absolute peak.
Your new White Brothers fork has oil damping and is air sprung for light weight performance. The air spring and damper is
set stock to satisfy a wide range of rider weights and riding styles. Fine tuning can be easily accomplished by changing air
pressure and external damper settings. See the tuning section for details. Steering accuracy is improved over conventional
MTB forks by utilizing superior materials and design. These include oversized 32mm fork tubes, a torsion box design steering
crown with pressed in tubes, a one piece billet brake arch and extra thick drop-outs. The WB bootless design allows a
considerable amount more slider/stanchion overlap than competitor forks which increases fork steering accuracy. Every effort
has been made to make White Brothers forks very light and perform at a level superior to other forks on the market. To ensure
peak performance, proper installation and periodic maintenance is required. When riding on public land, please respect the
rights of others and stay on established paths and trails. By riding responsibly, you are helping ensure the future of our sport.
IMPORTANT
CONSUMER SAFETY
PAGE 2