4
Wilton’s 14-inch Tradesman Vertical Band Saws
are specially designed to effectively cut a variety of
materials including wood, plastic, bakelite, com-
posites, ferrous and non-ferrous metals. Models
8201 and 8203 are wood and metal cutting band
saws.
Wilton’s Model 8201VS and 8203VS 14-inch
Tradesman Variable Speed Band Saws are ideally
suited for metal cutting only with an infinitely
variable speed range from 116 to 334 SFPM. The
variable speed drive system allows the operator to
fine-tune the blade speed to the material being cut
to maximize the life of today’s bi-metal blades.
These versatile and dependable saws are capable
of contour cutting, straight cutting and re-sawing,
and these band saws can cut delicate curves in
thick or thin stock.
General Specifications
Capacity 8201 8203 8201VS 8203VS
Standard .............. 6-in. under guide ..... 6-in. under guide ....... 6-in. under guide ...... 6-in. under guide
With 12-in. Riser ..12-in. under guide ... 12-in. under guide ..... 12-in. under guide .... 12-in. under guide
Blade to frame .....13.5-in. .................... 13.5-in. ..................... 13.5-in. ..................... 13.5-in.
Motor
Rating ..................1 HP 1-Ph ............... 1 HP 3-Ph ................. 1 HP 1-Ph ................ 1 HP 3-Ph
Voltage.................115 vac.................... 220/440 vac .............. 115 vac .................... 220/440 vac
Speed .................. 1725 rpm................. 1725 rpm .................. 1725 rpm.................. 1725 rpm
Cutting Speeds
Wood (SFPM) ......3300 ........................ 3300 ......................... 2600 ......................... 2600
Metal (SFPM) ....... 39, 57, 78, 107, ....... 39, 57, 78, 107, ........ 116 – 334 ................. 116 – 334
142, 196, 278 .......... 142, 196, 278 ............ Variable Speed ......... Variable Speed
Dimensions
Length .................20 Inches ................ 20 Inches .................. 20 Inches ................. 20 Inches
Width ................... 16 Inches ................ 16 Inches .................. 16 Inches ................. 16 Inches
Height ..................66 Inches ................ 66 Inches .................. 66 Inches ................. 66 Inches
Height from Floor .....66 Inches ................ 66 Inches .................. 66 Inches ................. 66 Inches
Table Tilt to Right .....45 Degrees ............. 45 Degrees ............... 45 Degrees .............. 45 Degrees
Table Tilt to Left ....... 10 Degrees ............. 10 Degrees ............... 10 Degrees .............. 10 Degrees
Miter Gauge Groove
Width ...................3/4-Inch ................... 3/4-Inch .................... 3/4-Inch .................... 3/4-Inch
Depth ................... 3/8-Inch ................... 3/8-Inch .................... 3/8-Inch .................... 3/8-Inch
Miter Gauge .............Standard.................. Standard ................... Standard .................. Standard
Blade Dimension
Standard ..............3/8x0.025x92.5 In. ... 3/8x0.025x92.5 In. .... 3/8x0.025x92.5 In. ... 3/8x0.025x92.5 In.
Specifications