Wilton A5816 Drill User Manual


 
4
General Specifications
The Wilton 15-Inch Vari-Speed Drill Presses, Models
A5816, A5818, A5836, and A5838 provide drilling
speeds from 400 to 5,000 rpm. Simple handwheel
adjustment sets the speeds with an LED speed
display on the faceplate of the machine.
Wilton's 15-inch vari-speed drill press provides a solid
base for drilling and offers a wide range of spindle
speeds. The large quill provides greater accuracy.
The large worktable provides the operator with room
to work and ample support for the workpiece. The
drill press has a 3-inch diameter column for head and
table support. The 15-Inch Vari-Speed Drill Press is
equipped with a standard table raiser.
Specifications
Model ............................ A5816 ..................... A5818....................... A5836 ....................... A5838
A3816 A3818 A3836 A3838
Type .............................. Floor Model ............. Floor Model .............. Bench Model ............. Bench Model
Motor:
Motor Speed (rpm) .... 1,725 rpm ................ 1,725 rpm ................. 1,725 rpm .................. 1,725 rpm
HP ............................. 1 HP ........................ 3 HP ......................... 1 HP .......................... 3 HP
Power Rating............. 1 Ph, 115/220V........ 3 Ph, 220/440V......... 1 Ph, 115/220V ......... 3 Ph, 220/440V
Spindle speed (rpm) ...... 400 to 5,000rpm ...... 400 to 5,000 rpm ...... 400 to 5,000 rpm ....... 400 to 5,000rpm
Capacity:
Cast iron .................... up to 5/8-in. ............. up to 5/8-in. .............. up to 5/8-in. .............. up to 5/8-in.
Steel .......................... up to 1/2-in. ............. up to 1/2-in. .............. up to 1/2-in. .............. up to 1/2-in.
Drills to center ............... 15 in. ....................... 15 in. ........................ 15 in. ......................... 15 in.
Quill diameter ................ 2-1/4 in. ................... 2-1/4 in. .................... 2-1/4 in. ..................... 2-1/4 in.
Quill travel ..................... 6 in. ......................... 6 in. .......................... 6 in. ........................... 6 in.
Spindle taper ................. #2 MorseTaper ........ #2 MorseTaper ......... #2 MorseTaper .......... #2 MorseTaper
Dimensions:
Table (overall)............ 15-1/4 x 17-3/4 in. ... 15-1/4 x 17-3/4 in. .... 15-1/4 x 17-3/4 in. ..... 15-1/4 x 17-3/4 in.
Table (working area).. 12-1/2 x 14-1/2 in. ... 12-1/2 x 14-1/2 in. .... 12-1/2 x 14-1/2 in. ..... 12-1/2 x 14-1/2 in.
T-slot ......................... 1/2-in. ...................... 1/2-in. ....................... 1/2-in. ........................ 1/2-in.
Spindle to table.......... 41 in. ....................... 41 in. ........................ 41 in. ......................... 41 in.
Spindle to base.......... 47-1/2 in. ................. 47-1/2 in. .................. 47-1/2 in. ................... 47-1/2 in.
Overall height ............ 67-1/2 in. ................. 67-1/2 in.