Xantrex Technology 10A12V Battery Charger User Manual


 
Troubleshooting
975-0401-01-01 3–15
Symptom
The Truecharge™ 2 Battery Charger appears to be taking too long to
charge battery. Ready indicator LED does not illuminate after 24 hours of
charging.
Symptom
The Truecharge™ 2 Battery Charger appears to have quickly charged the
battery. Ready indicator LED illuminates sooner than expected.
Possible Cause Solution
Battery capacity is too high for
the Truecharge™ 2 Battery
Charger model.
Load connected to battery is
draining charge current so that
battery does not recharge.
Battery has a damaged cell or
has reached the end of its useful
life.
Use a higher capacity charger.
Disconnect all loads or switch loads off.
Replace battery.
Possible Cause Solution
Battery capacity is too low for
the Truecharge™ 2 Battery
Charger model.
Battery has a damaged cell or
has reached the end of its useful
life.
Use a lower capacity charger.
Using the optional remote panel (if
installed), reduce the output current
delivered to the smaller battery.
Replace battery.