Xantrex Technology 30A12V Battery Charger User Manual


 
Introduction
1–14 975-0401-01-01
Remote Panel (Sold Separately)
This section describes the parts of the optional remote panel
(Part number: 808-8040-00) of the Truecharge™ 2 Battery
Charger. The remote panel can be mounted using a
communications cable up to 15 m (50 ft) from the
Truecharge™ 2 Battery Charger connected via the
communication port for convenience.
The Remote Panel can be used to:
Program the charger for battery type and temperature
Set the charger mode (two or three-stage charging)
Activate and terminate equalization (not allowed for
GEL and AGM)
Limit the maximum charger output current (20, 40, 60,
80, and 100% of charger rating) to lower the current
drawn from the generator or AC source
Set the charger to
ON or STANDBY
Set or cancel an equalization cycle
Display faults and warnings
Display basic battery level and settings
Figure 1-6
Truecharge™ 2 Battery Charger Remote Panel (optional)
1
2a
5
8
4
6
3
7
2
6a