Xantrex Technology 806-1054 Battery Charger User Manual


 
38 Freedom HF Owner’s Guide
Troubleshooting Reference
ELECTRICAL SHOCK AND ENERGY HAZARD
Do not disassemble the Freedom HF. It does not contain any user-
serviceable parts. Attempting to service the unit yourself could
result in an electrical shock or burn.
Failure to follow these instructions can result in death or serious
injury.
Table 8
Troubleshooting Reference
Problem Possible Cause Solution
Battery charging current is lower than the
charging set point during bulk charge mode.
Ambient (environment) temperature is
high.
Do not be alarmed, the unit is performing normally. The
charging current automatically de-rates at high ambient
temperature.
Improve ventilation. Make sure the unit’s ventilation openings
are not blocked.
Alarm does not sound when an error is
encountered.
Alarm is turned OFF. Press and hold the Select button for two seconds to disable (or
enable) the audible alarm. See “Display Panel Operation” on
page 15.
Freedom HF InvChg Owners Guide.book Page 38 Tuesday, April 29, 2014 12:10 PM