Zanussi ZOB 482 XL Air Compressor User Manual


 
28
Before using the oven for the first time
To open the oven door, always hold the
handle in the centre.
Remove all packaging, both inside and outside
the oven, before using the oven.
Before using for the first time, the oven should be
heated up without food.
During this time, an unpleasant odour may be emitted.
This is absolutely normal. It is caused by manufacturing
residues.
Ensure the room is well ventilated.
1. Switch the oven function control knob to
conventional cooking
.
2. Set the thermostat control knob to 250.
4. Open a window for ventilation.
5. Allow the oven to run empty for approximately
45 minutes.
This procedure should be repeated with the Full Grill
function and the Fan Forced Cooking function
for approximately 5-10 minutes.
Then let the oven cool down. Then dampen a soft
cloth with warm water and a little mild washing-up
liquid and use this to clean the oven cavity.
Before using for the first time, carefully wash the
oven accessories as well.
)
The cooling fan
The cooling fan is designed to cool the the oven and
the control panel. The fan switches on automatically after a
few minutes of cooking. Warm air is blown out through the
aperture near the oven door handle. When the oven is
switched off, the fan may run on after the oven is switched
off to keep the controls cool. This is quite normal.
The action of the cooling fan will depend on how
long the oven has been used and at what
temperature. It may not switch in at all at lower
temperature settings nor run on where the oven has
only been used for a short time.