Filter
Top Products
P-660RU-Tx v2 Quick Start Guide
16
B) If your ISP gave you Internet connection information,
ensure you enter it correctly. For example, if your
account has a user name and password, make sure you
type it correctly. In addition, if you are not sure which
encapsulation your ISP uses, contact your ISP. If your
ISP did not give you Internet connection information,
follow the steps in section 2.
C) If you are using a new Internet account, contact your
ISP to make sure it is active.
D) If you still have problems, see Troubleshooting in the
User’s Guide.
If you cannot access the Internet after you take the steps
above, either try the following or contact your ISP:
E) Turn your P-660RU-Tx v2 off and on. Open your Internet
browser if it is not already open.
Let the P-660RU-Tx v2 complete the DSL connection test
(this may take several minutes). See section 2 for details.
If the test is successful, check whether you can access the
Internet.
F) If the test is unsuccessful or if you cannot access the
Internet, log in to the P-660RU-Tx v2’s Web
Configurator (see section 2).
• Click Network > WAN > Internet Connection. Ensure
that the settings in this screen are the same as those
your ISP gave you. If your ISP gave you a static IP
address to use, select Static IP Address in the IP
Address section and enter it in the IP Address field. If
not, select Obtain an IP Address Automatically.
Click Apply.