Filter
Top Products
P-660W-Tx v2 Quick Start Guide
6
3 Check your WAN and LAN settings in the
screen that appears. Click Save Settings.
Go to step 9 of this section.
Routing
• If you selected Routing in step 1 of this section, one of the following four screens appears
depending on the Encapsulation you chose in step 1 of this section.
• PPPoA, PPPoE: Type your User
Name and Password.
• PPPoE, PPPoA, ENET: Select
Obtain an IP Address Automati-
cally if your ISP (Internet Service
Provider) assigns IP addresses
automatically. Otherwise, select
Static IP Address if your ISP has
assigned you an IP address.
Check with your ISP if you are
unsure of which setting to choose.
• PPPoA, PPPoE: Select Nailed-Up
Connection to set a permanent
connection which automatically
reconnects on disconnection.
Select Connect on Demand to
allow connection only when
required and with an idle time-out
period (in seconds) in the Max.
Idle Timeout field.
• PPPoE, PPPoA, ENET, RFC 1483: Select SUA Only for shared Internet access with a sin-
gle ISP. This is recommended. Otherwise, select None if accessing the Internet on a public
IP address, or select Full Feature for advanced NAT features. See your User’s Guide for
more details.
4 Click Next.
PPPoE
PPPoA
RFC 1483
ENET