1-4
C
HAPTER
1: I
NSTALLING
THE
PC C
ARD
Connecting the 3CCFE575BT CardBus PC Card
1 Remove all PC Cards from your notebook.
2 Connect the PC Card cable to the CardBus PC Card
➀
,
and to the network cable
➁
.
Figure 1-2
Connecting the CardBus PC Card
3 Connect the RJ-45 connector to the network port
➂
.
4 Turn the notebook on.
5 When Windows is ready, insert the PC Card
➃
into the
CardBus PC Card slot. Slide it all the way in.
CAUTION:
Do not force the CardBus PC Card into the slot
or you may bend the pins inside the slot.
If the CardBus PC Card doesn’t fit into the slot, make sure
that your notebook has a CardBus slot. Refer to your
notebook documentation or contact your notebook
manufacturer.
You may see Windows 95 prompts for driver installation.
The final installation step is to install the network driver
that allows you to login to the network. For instructions
on how to install the network driver, go to Chapter 2.
