A SERVICE OF

logo

@Adam Equipment Company 2004
8
5.0 ERROR CODES
ERROR
CODES
DESCRIPTION SUGGESTIONS
$"
Over range Remove the weight from the scale.
If the problem persists contact your dealer or Adam
Equipment for assistance.
&''
Zero Setting Error The scale was outside the normal auto-zero setting
range (4% of capacity),
Check the hook is empty or
Calibrate zero point again.
&''
A/D out of range The values from the A/D converter are outside the
normal range.
Remove weight from the scale if overloaded.
The load cell or the electronics may be faulty.
If the problem persists, contact your dealer or Adam
Equipment for assistance.
$
Battery low Charge the battery immediately.