@Adam Equipment Company 2004
6
4.0 PARAMETER
4.1 Enter setting mode
Turn off the power of the scale and
then turn the power on again.
Press the [ZERO] and [CHANGE]
key at the same time during self-
checking. Display shows “”,
asking for the password. Input the
password using the [LOCK] key to
move the active digit and the
[CHANGE] key to increment a
digit. Press [ZERO] to confirm.
The default password is “”,
Display shows “ ”, indicating
the scale has entered the setting
mode. Press the [CHANGE] key to
shift the parameter items, use
[ZERO] key to confirm and the
[LOCK] key to escape from setting
the current item.
4.2 PARAMETER SETTING TABLE
FUNCTION
DESCRIPTION DEFAULT
Sets division
: high resolution
: standard resolution
: low resolution
Sets zero tracking range
Sets baud rate (RS-232 is an optional function)
: 600bps,
: 1200bps
:2400bps,
: 4800bps
: 9600bps
