A SERVICE OF

logo

Appendix Service Information
Operating Checklist
157
Service
Information
Operating Checklist
Before returning your power supply to Agilent Technologies for service or
repair check the following items:
Is the Power Supply Inoperative?
Verify that the ac power cord is connected to the power supply.
Verify that the front-panel power switch has been pushed.
Verify that the power-line fuse is installed and not open (See page 20):
Verify the power-line voltage setting.
See “If the Power Supply Does Not Turn On” on page 20.
Does the Power Supply Fail Self-Test?
Verify that the correct power-line voltage is selected.
See “If the Power Supply Does Not Turn On” on page 20.
Remove all load connections to the power supply.
Ensure that all terminal connections are removed while the self-test is
performed.