A SERVICE OF

logo

Open as PDF
next previous
60
Port Please input the port number here. You can define a single port
(80) or a range of ports (1000-1999). Add prefix "T" or "U" to
specify TCP or UDP protocol, for example, T80, U53,
U2000-2999. No prefix indicates both TCP and UDP are defined.
Leaving this field blank indicates all ports.
Enable Check/uncheck Enable to enable/disable each Packet Filtering
rule.
Schedule Rule# Enter a Schedule Rule number to activate the filtering rule only
within the desired time frame. Please refer to 3.4.7 Schedule
Rule for detailed setting instructions. Set 0 to let the filtering rule
always take effect.
Inbound Filter Click Inbound Filter button to go to Inbound Packet Filter settings.
Click on Save after you finished all settings.