A SERVICE OF

logo

Open as PDF
next previous
69
1. Enter MAC address manually or select one from the DHCP
client list, and click “<<Copy” to copy the MAC address of the
client computer / network device.
2. Assign a group number by selecting a number from the
drop-down list.
3. Select a time schedule rule from the drop-down list.
4. Click Add.
3.3.4.3 Interface Access Control
Interface Access Control allows you to control the network access based on each LAN
Port and Wireless LAN within specific time schedule.
Parameters Description
Interface Access Control Check this box to enable Interface Access Control. All settings in
this page will take effect only when Enable is checked.
Interface The physical Interface of router: LAN Port 1~4 and Wireless LAN.