19
FC1 / FC1 Ex Getting to know your handset Important information
Placement of the charger
Place the charger on a stable, even surface, e.g. a table outside of hazardous
areas. Choose a location that is protected from direct sunlight and dampness.
CAUTION
For charging explosion-proof handsets, e.g. type FC1 Ex, use the
charger type FC1 S Ex only.
(V 1.7a - 10/2004)
Plug the plug-in mains unit into a socket.
Insert the small connecting cord plug into the back of the charging device.
The charger is ready for operation.
Charging the handset
Simply place the handset into the charger. You will hear an acknowledgement
tone. The display light will switch on briefly. The handset remains switched on
or off.
The battery symbol in the symbol row moves until the battery is completely
charged.
When the batteries are being charged, they will become slightly warm. This is
perfectly normal.
As soon as the battery is full, trickle charging starts. This is indicated by a
blinking frame of the battery full symbol.
Charging the spare battery
Charging an FC1 battery using the Charger Plus
At the rear side of the Charger Plus a slot is provided for charging a spare
battery. This slot is covered by a lid. Open the lid, insert the battery to be
charged and gently press it against the charger’s housing. The contact ar-
FC-1_BA_GB.book Seite 19 Montag, 1. September 2008 4:41 16
