72
The functions FC1 / FC1 Ex
Call charge display
You may view the charges incurred by the last call as well as the total incurred
by all calls made since the charges were last cleared. You may also specify
how the charges are to be shown in the display. To do this, you must switch on
the “receive charges” function on the handset. The function must be enabled
within the telephone system.
Switching the “receive charges” function on or off at the handset
Menu Addit. services
Menu Recv. charges
When you select the menu Receive call charges, the setting “off” is always of-
fered first.
Select the selection process, e.g. on.
Confirm.
NOTE
If the “receive charges” function has been switched on, the totalizing
meter will still add up the charges even if the call charge display is
switched off. If the “receive charges” function has been switched off,
the totalizing meter will no longer add up the charges and remains at
its current value.
O K
O K
O K
O K
O K
O K
FC-1_BA_GB.book Seite 72 Montag, 1. September 2008 4:41 16
