Chapter 2 Avaya P330-ML Layer 2 CLI Commands
Avaya P330-ML Reference Guide 197
The syntax for this command is:
show upload status [<mod_num>]
Example:
show username
User level: supervisor
Use the show username command to display the local user accounts.
The syntax for this command is:
show username
Example:
show utilization
User level: privileged, supervisor.
Use the show utilization command to display CPU utilization statistics for
modules in the stack.
mod_num
(Optional)
Number of the module. If you do not specify a number, upload
statuses for all modules in the stack are shown.
Router-N> show upload status 1
Module : 1
Source file : stack-config
Destination file : c:\conf.cfg
Host : 149.49.36.200
Running state : Executing
Failure display : (null)
Last warning : No-warning
P330-1(super)# show username
User account password access-type
------------------------------- -------------------------------- --------
root ***** admin
gkohll ***** read-only
readwrite ***** read-write
