![](https://pdfstore-manualsonline.prod.a.ki/pdfasset/d/85/d852c58b-5314-4d9a-a349-d9c8cf1c4b69/d852c58b-5314-4d9a-a349-d9c8cf1c4b69-bg45.png)
Chapter 2 Avaya P330-ML Layer 2 CLI Commands
Avaya P330-ML Reference Guide 55
reset stack
User level: privileged, supervisor.
Use the reset stack command to perform a hardware reset of the entire stack.
The syntax for this command is:
reset stack
reset wan
User level: user, privileged, supervisor
Use the reset wan command to perform a software reset in the X330 WAN Access
Router Module.
The syntax for this command is:
reset wan [module][bank-a]
To reset a WAN module residing on switch 2:
retstatus
User level: supervisor
Use the retstatus to display the return status of the previously executed
command.
The syntax for this command is:
retstatus
Example:
module Optional - the module number where the WAN module to be
reset resides.
bank-a Optional - boot the WAN module from bank-a after reset.
P330-N# retstatus
Succeeded