148 Additional Information
[Flicker Reduction]: If the screen starts to flicker when recording movies
under fluorescent lights, change the setting to reduce the effect.
• This function is available only when the shooting mode is set to
or .
[Image Stabilizer]: The image stabilizer reduces camcorder blur (blur due
to the camcorder moving). Select the image stabilization mode according
to the shooting conditions.
[ Dynamic]: Compensates for a higher degree of camcorder shake,
such as when shooting while walking, and is more effective as the zoom
approaches full wide angle. Available only when [Zoom Type] is set to
[Optical].
[ Standard]: Compensates for a lower degree of camcorder shake,
such as when shooting while remaining stationary, and is suitable for
shooting natural-looking scenes.
[
j Off]: Use this setting when the camcorder is mounted on a tripod.
• This function is available only when the shooting mode is set to ,
or .
• If the degree of camcorder shake is too high, the image stabilizer may
not be able to fully compensate.
• You can activate the Powered IS function (A 143) when more powerful
image stabilization is required.
s / Playback Setup
•
[Slideshow Transition]: You can select the transition effect between
images in a slideshow (A 94).
SCN
Menu item Setting options
A
[Select Music] [j Off], [i On]
When [i On] - list of music tracks,
[Music Balance] [y] [Û] (Original
sound/Background music)
87,
94
[Slideshow Transition] [j Off], [k Dissolve], [
l Slide Image] –
[Video Snapshot Length] [C 2 sec], [
D 4 sec], [F 8 sec] 71,
85
