38 Basic Shooting and Playback
2 Slide the lens cover switch down.
3Press
Y to begin recording.
• Press
Y again to stop recording.
• The ACCESS indicator will flash from time to time while the scene is
being recorded.
Recording standby: While recording:
When you have finished recording
1 Make sure that the ACCESS indicator is off.
2 Close the LCD panel to turn off the camcorder.
You can also press [.
3 Slide the lens cover switch up.
IMPORTANT
• To protect the lens, keep the lens cover closed when you are not
recording.
• Observe the following precautions while the ACCESS indicator is on or
flashing. Failing to do so may result in permanent data loss or damage
to the memory.
! Shooting mode (A 59)
" Number of scenes recorded
# Scene counter (hours : minutes : seconds)
$ Video format (A 56)
% Remaining recording time on the memory
& Remaining battery charge
' Video quality (A 56)
