112
E
Using a Memory Card
(MV4i MC only)
Preventing Accidental Erasure (Protect)
-MV4i MC only-
This section describes how to protect the still image from the Card Operation
submenu when displaying an index screen in CARD PLAY mode (including the
way to cancel the setting) .
You can also protect a still image through CARD PHOTO REVIEW ( 110) or
File Operation menu ( 111).
Protecting an image while viewing an index screen
Make sure a memory card that has images recorded on it is inserted into the
camcorder.
1. With an image in the display, press the INDEX SCREEN button.
• Up to 6 images appear in the display.
• Move the mark to the image that you want to protect (Index Screen
108)
2. Open the menu and select CARD OPER.
3. Select
\\
PROTECT .
4. Press the SELECT dial in.
• The protect mark appears on the image.
• Now you are unable to erase this image.
• Press the SELECT dial again to cancel it.
5. Close the menu.
Note:
• To cancel image protection, move the mark to the protected image and
press the SELECT dial in. The protect mark disappears.
( 34)
#5_MV4/MV4 MC-i_E(98-125) 01/7/31 10:34 Page 112 (1,1)
