18
E
Mastering
the Basics
The camera’s short operation confirmation beeps are indicated by ` in the
illustrations. Beeps sound upon certain camera operations such as when you turn
the camera on, during the self-timer countdown, right before the camera’s
automatic shut-off, and also upon any unusual condition of the camera. Beeps are
not recorded on the tape.
( 34)
Confirmation/Warning beeps
About the POWER dial lock lever
The POWER dial lock lever has been preset to the 2 position. Switch it to the
22 position when you want to use the P.SCAN ( 49) and CARD REC
(MV4i MC only, 103) modes. We recommend that you return the lock lever to
the 2 position when you finish recording.
MV4 2:PLAY, OFF, MOVIE
22 : PLAY, OFF, MOVIE, P.SCAN
MV4i 2:VCR, OFF, MOVIE
22 : VCR, OFF, MOVIE, P.SCAN
MV4i MC 2:CARD PLAY, VCR, OFF, MOVIE
22 : CARD PLAY, VCR, OFF, MOVIE, P.SCAN, CARD REC
To turn the beep off, open the menu and select SYSTEM. Then select
BEEP, set it to OFF and close the menu.
( )
#2_MV4/MV4 MC-i_E(06-32) 01/7/31 9:51 Page 18 (1,1)
