Custom Picture Settings
116
Copying a File from the Camera to an SD Card
1 After selecting a file in the camera, open the [Copy To *] submenu.
[+/Transfer File] > [Copy To *]
2 Select the file slot on the SD card under which to save the file and then
press SET.
• If there are available slots, you can select [New File] to save the file in the first available slot.
3 Select [OK] and then press SET.
• The currently selected file will be copied to the selected slot on the SD card, overwriting the file in that slot.
When the confirmation screen appears, press SET.
4 Press the CUSTOM PICTURE button to exit the custom picture menu and apply the selected custom picture
settings.
Replacing a File in the Camera with a File on an SD Card
1 After selecting a file in the camera to replace, open the [Load From *]
submenu.
[+/Transfer File] > [Load From *]
2 Select the file to transfer to the camera and then press SET.
3 Select [OK] and then press SET.
• The file in the camera will be overwritten by the one on the SD card. When the confirmation screen appears,
press SET.
4 Press the CUSTOM PICTURE button to exit the custom picture menu and apply the selected custom picture
settings.
Copying a File from an SD Card to the Camera
1 After selecting a file on the SD card, open the [Copy To Cam.]
submenu.
[+/Transfer File] > [Copy To Cam.]
2 Select the file slot under which to save the file and then press SET.
3 Select [OK] and then press SET.
• The currently selected file will be copied to the selected slot on the camera, overwriting the file in that slot.
When the confirmation screen appears, press SET.
4 Press the CUSTOM PICTURE button to exit the custom picture menu and apply the selected custom picture
settings.
Replacing a File on an SD Card with a File in the Camera
1 After selecting a file on the SD card to replace, open the [Load From
Cam.] submenu.
[+/Transfer File] > [Load From Cam.]
2 Select the file to transfer to the SD card and then press SET.
3 Select [OK] and then press SET.
• The file on the SD card will be overwritten by the one on the camera. When the confirmation screen
appears, press SET.
4 Press the CUSTOM PICTURE button to exit the custom picture menu and apply the selected custom picture
settings.
[+/Transfer File]
[Copy To *]
[+/Transfer File]
[Load From *]
[+/Transfer File]
[Copy To Cam.]
[+/Transfer File]
[Load From Cam.]
