Printing Support.
In Windows Me or Windows 98, in the
Device Manager sheet, double-click
Universal Serial Bus controllers and
then double-click iP3300.
(3) Click the General tab and
make sure that there is no
indication of a problem with the
device.
Spooling is
enabled (Windows
Me or Windows 98
only).
Disable spooling to send the print job
directly to the printer and try printing
again.
(1) Open the printer properties
dialog box.
See Opening the Printer Properties
Dialog Box Directly from the Start
Menu.
(2) Click the Details tab and then
Spool Settings.
(3) Click Print directly to the
printer.
Error No.: 300 Is Displayed
Cause Action
The printer is not
ready.
Make sure that the printer is turned on,
and that it is connected securely to the
computer.
If the POWER lamp is off, turn the
printer on.
While the POWER lamp is flashing
green, the printer is initializing. Wait until
the POWER lamp stops flashing and
remains lit green.
When the ALARM lamp is flashing
orange, an error may have occurred on
the printer. For details on how to resolve
