Cognex In-sight 2000 Manual

A SERVICE OF

next previous

Installing the In-Sight 2000

12

Serial Port Specifications

In-Sight provides two high-speed (115 kbaud) asynchronous serial ports (SERIAL0 and

SERIAL1) for communication with a PC or other devices (Figure 3). These ports observe the

RS-232C protocol through RJ-45 connectors.

To accommodate a DB-9 device, In-Sight includes a serial adapter cable (P/N CIO-2050-00)

with an RJ-45 connector on one end and a DB-9 connector on the other. Use a standard serial

cable (not null modem) when connecting a serial device to In-Sight.

Figure 3. Serial Port Pin Numbers

Table 2 contains the signal name for each pin labeled in Figure 12.

Table 2. Serial Port Pin Numbers and Assignments

Pin Signal Name Pin Signal Name

1 DCD 2 RX data

3 TX data 4 DTR

5 Ground 6 DSR

7 RTS 8 CTS