A SERVICE OF

logo

Open as PDF
next previous
2 MVS-8100D Hardware Description
Cognex MVS-8100D and CDC Cameras Hardware Manual 37
External I/O Module
The Cognex external I/O module, P/N 800-5712-3, connects to the 15-pin I/O port of the
MVS-8100D. It serves as an opto-isolated connection point for parallel I/O signal lines
originating in the MVS-8100D.
Capabilities of the external I/O module include:
• 4 optically isolated inputs and 8 optically isolated outputs for the MVS-8100D2 and
MVS-8100D3
• 2 optically isolated inputs and 6 optically isolated outputs for the MVS-8100D1
• Signal voltage, 5 V to 24 V DC at 15 mA
• Optical isolation for the both inputs and outputs
• LEDs to indicate the state of each line
OUT_5 13 7
OUT_6 14 2
OUT_7 15 14
OUT_8 16 11
VCC_5V 17 1
VCC_5V 18 1
GND 19 6
GND 20 6
NC 21 NC
GND 22 15
GND 23 15
GND 24 15
NC 25 NC
NC 26 NC
Signal Name Pin on HD-26M Pin on HD-15F
Table 19. Pin numbering of cable 300-0359