66
Settings
Network Settings
Displays and configures network settings.
Click the [Apply] button to save the settings.
• The new configuration settings are activated after restarting the
network connection. When the configuration settings are changed, you must
restart the network connection. You can restart the network connection by
clicking [Network Restart] on the main menu.
• If you connect the projector to an existing network, consult a network
administrator before setting server addresses.
NOTE
Item Description
IP Configuration Configures network settings.
DHCP ON Enables DHCP.
DHCP OFF Disables DHCP.
IP Address Configures the IP address when DHCP is disabled.
Subnet Mask Configures the Subnet Mask when DHCP is disabled.
Default Gateway Configures the Default Gateway when DHCP is disabled.
Projector Name Configures the Projector name.
SysLocation Configures the location to be referred to when using SNMP.
SysContact
Configures the contact information to be referred to when
using SNMP.
