A SERVICE OF

logo

On one side, there may also be a plastic guide rail. Follow these
steps to remove the mounting frames (and guide rail) from the
drive:
1.
If necessary, remove the screws securing the plastic guide
rail and the metal grounding plate to one of the mounting
frames, as shown below.
*<uide
rail
\
\
grounding
plate
2.
Remove the four screws securing the mounting frames to
the hard disk drive. There are two screws securing each
frame, as shown below.
screws
\
‘*
screws
is,
Installing and Removing Disk Drives
B-9