A SERVICE OF

logo

10 Setting Up the Scanner
L
R4CD180
Setup Guide Rev. C
SETUP.FM A5 size
12/18/03
Proof Sign-off:
KOW N.Mizuno S.Koide
H.Kimura
NOC K. Lee
Setting Up
You must install the software BEFORE connecting the scanner
to your computer.
1. Make sure that the scanner is turned off. The scanner is off
when the . Power button is raised.
2. Connect the power cord to the AC inlet on the back of the
scanner, and then plug the other end into an electrical outlet.
Note:
When you connect the power cord to the AC inlet, you need to force
it in at the entrance; otherwise, the transportation lock will not be
released.
. Power button