Note
You can use the commands listed above while you are
running a program. However, if the program uses one of
these commands for another function, you cannot use it to
change the processor speed. For example, if you are running
a program that uses the
[cbll[m
-
command to move
6
the cursor, you cannot enter
[mJIm1[-1
to change the
processor speed to low. Another alternative is to use the
ESPEED program, described below.
The speed setting remains in effect until you do the following:
LI
Press
[cbl)
(Alt)
66)
or the RESET button
Q
Turn off the computer
Cl
Change it using the SETUP program
P
Change it with another keyboard command
P
Change it using ESPEED.
Using the ESPEED Program
ESPEED provides an easy way to change the processor speed if
your application program does not recognize the
[cbll
key
commands or
if you want
to include the program command in
a batch file.
The ESPEED program is on the Reference diskette. If you
have
a
hard disk drive, copy the file ESPEED,EXE from your
Reference diskette
onto
your hard disk and run the program
from there. If you do not have a hard disk, insert your
Reference diskette in drive A and log onto drive A before you
enter the command to start the program.
1-32
Using Your Computer
