A SERVICE OF

logo

43
V5.1‐March2010
When the ‘Hold-off’ menu is accessed the screen will appear as below:
Figure 27b: ‘Hold-off’ menu screen (MS420)
Refer to the Table below for details on the ‘Hold-off’ mode: (MS420 only)
Function menu Settings
Description
OFF Time Select a time duration (hold-off time) that
will act as a delay before each trigger
event
Time Increase
Decrease
Increase the time
Decrease the time
Reset the Time Reset the hold-off time to 100ns
Back Return to the previous menu
Note:
Trigger Hold-off can stabilize complex waveforms. Hold-off time is the
oscilloscope’s waiting period before starting a new trigger. During Hold-off,
oscilloscope will not trigger.