General Operation 27
2.3.3 Changing the use of [F1] in the Opening screen
By default, [F1] is used in the Opening screen to switch between default set-
tings, as described in Section 2.3.1. However, if you do not have a need for dif-
ferent sets of default settings, you can use it as a shortcut to any real-ear or cou-
pler screen. Unlike [F2] and [F3], whose functions change depending upon the
last real-ear or coupler multicurve screen you entered, the function of [F1] will
remain constant. This ability is only available if you have the Real-Ear Option.
To change the function of [F1] in the Opening screen:
1. Press [MENU] from the Opening screen to enter the Default Settings menu.
2. Press [NEXT] to enter the Advanced Default Settings menu.
3. Select F1 KEY with [∨, ∧].
4. Use [<, >] to select one of the following: USER SETTING, CP MULTICURVE
(Coupler Multicurve), CP TARGET (Coupler Target), CP EARSIM (Coupler
EarSim), AUDIOGRAM (Audiogram Entry), SPL (Real-Ear SPL), GAIN (Real-
Ear Aided & Unaided), and INS. GAIN (Real-Ear Insertion Gain). The USER
SETTING selection programs [F1] to choose between the different user set-
tings instead programming it to be used as a shortcut key to a particular
screen.
5. Press [EXIT] to return to the Opening screen.
2.3.4 Setting the date and time
The FP35 contains a lithium battery-based clock to keep track of the time and
date.
To change the settings of the clock:
1. Press [MENU] from the Opening screen to enter the Default Settings menu.
2. Press [F3]—CALIBRATE
3. Press [F2]—SET TIME.
4. Use the [<, >] keys to choose the time unit you would like to change. The
XM choice selects between AM, PM, and 24 hour format.
5. Use the [∨, ∧] keys to adjust the setting.
6. Press [EXIT] to leave the Time Setup Screen. Your changes will automati-
cally be stored.
2.3.5 Changing the external monitor colors
When the FP35 analyzer is connected to an external monitor, you can change
the colors it uses. Although most color computer monitors can be used with
the FP35 analyzer, only two colors can actually be displayed on the external
display: the foreground color and the background color. These colors can be
changed in the Main Default Settings screen with the VIDEO FOREGND and
VIDEO BACKGND settings. These settings are only available when the FP35
analyzer has the external monitor option hardware installed.
