SECTION 2: CIRCUIT REQUIREMENTS
Extension Cords
Serious personal injury could occur if you
connect the machine to the power source
before you have completed the set up pro-
cess. DO NOT connect the machine to the
power source until instructed to do so.
220V Single-Phase
Grounding
Amperage Draw
Power Supply Circuit Requirements
If
you are unsure about the wiring codes in your
area or you plan to connect your machine to a
shared circuit, consult a qualified electrician.
Plug/Receptacle Type
Electrocution or fire could
result if this machine is
not grounded correctly or
if your electrical config-
uration does not comply
with all applicable codes.
Ensure compliance by
checking with a qualified
electrician!
Figure 1.
