A SERVICE OF

logo

Open as PDF
next previous
Chapter 3 Advanced Printing Tasks 162
Changing the Variable Fuser Mode
To change the variable fuser mode for a paper type from the control panel:
1 Press M
ENU
repeatedly until PAPER HANDLING MENU appears.
2 Press I
TEM
repeatedly until CONFIGURE FUSER MODE MENU=NO appears.
3 Press - V
ALUE
+ until YES appears.
4 Press S
ELECT
to select the option.
5 Press I
TEM
repeatedly until the desired paper type appears.
6 Press - V
ALUE
+ repeatedly until the desired variable fuser mode appears.
7 Press S
ELECT
to select the variable fuser mode.
8 Press G
O
to exit the menu.
CAUTION If you change the variable fuser mode to HIGH1, HIGH2, or HIGH3, be sure to
change the variable fuser mode back to the NORMAL setting when you are
done printing that job.