Print the print-quality troubleshooting page
1. Open HP ToolboxFX. See
Open HP ToolboxFX on page 69.
2. Click the Help folder, and then click the Troubleshooting page.
3. Click the Print button, and then follow the directions on the printed pages.
Optimize and improve print quality
Always make sure that the Type is setting in the printer driver matches the type of paper that you are
using.
Use the print-quality settings in the printer driver to prevent print-quality problems.
Use the Device Settings area in HP ToolboxFX to adjust settings that affect print quality. See
Open
HP ToolboxFX on page 69.
Also use HP ToolboxFX to help troubleshoot print-quality problems. See
Use HP ToolboxFX to
troubleshoot print-quality problems on page 117.
Calibrate the product
If you experience any print-quality problems, calibrate the product.
Calibrate the product using HP ToolboxFX
1. Open HP ToolboxFX. See
Open HP ToolboxFX on page 69.
2. Click the Device Settings folder, and then click the Print Quality page.
3. In the area for Color Calibration, select the Calibrate Now check box.
4. Click Apply to calibrate the product immediately.
Calibrate the product from the control panel
1. On the control-panel menu, press OK.
2. Use the Left arrow (
) or the Right arrow ( ) button to select System setup, and then press
OK.
3. Use the Left arrow (
) or the Right arrow ( ) button to select Print quality, and then press OK.
4. Use the Left arrow (
) or the Right arrow ( ) button to select Calibrate color, and then press
OK.
5. Use the Left arrow (
) or the Right arrow ( ) button to select Calibrate now, and then press
OK to calibrate the product.
118 Chapter 10 Solve problems ENWW
