10–3
Company confidential. Pelican User’s Guide, Ed 1, Final. Freeze Status: frozen
This is the cyan on page 10–3 (seq: 153)
This is the black on page 10–3 (seq: 153)
Functional specifications (continued)
Supported
Width (carriage axis) Length (paper axis)
me
a s
zes
Minimum Maximum Minimum Maximum
210 mm (8.3 in) E/A0-size plotter:
917 mm (36.1 in)
210 mm (8.3 in) Sheet:
1.32 m (52 in)
D/A1-size plotter:
625 mm (24.6 in)
Maximum length
of long-axis plot
on roll media:
15.2 m (50 ft)
Margins
For plotting area
(media size minus
mar
ins
see
Leading edge:
Trailing edge:
Sides:
17 mm (0.67 in)
17 mm (0.67 in)
5 mm (0.2 in)
page 10–7
All measurements 2 mm (0.08 in).
Resolution
On Setup Sheet, if
Color/Mono
is set to:
Print color as grayscale Print color as color
Fast print quality:
Other print qualities:
300 x 300 dpi.
600 x 600 dpi.
2
All print qualities: 300 x 300 dpi.
3
Accuracy
(Maximum
accumulated error)
0.38 mm (0.015 in) or 0.2% of the specified vector length, whichever is greater,
at 23_C (73_F), 50–60% relative humidity, on HP Matte Film.
Programming
languages
supported
HP-GL (7586B), HP-GL/2, HP RTL, PJL
1
The 600 dpi resolution specified is
addressable
resolution, that is, it refers to the smallest movement the print head
can make between dots rather than to the size of the dot.
2
Except for glossy media types, on which the resolution is always 300 dpi.
3
Except for black with HP RTL, where the resolution is 600 x 600 dpi.
Reference
Plotter specifications
REFERENCE
10
Localization Note. Very similar to Loquillo 750C UG parts of pp11-2 and 11-3.
350
