350C
2–5
Company confidential. Pelican User’s Guide, Ed 1, Final. Freeze Status: frozen
This is the cyan on page 2–5 (seq: 45)
This is the black on page 2–5 (seq: 45)
Recommended print-quality settings and recommended media
for color plots
Print quality
(set either on the front panel
or in the software)
HP media Fast Normal Best
HP Opaque Bond OK for monochrome, but color for CAD
drawings only
1
HP Translucent Bond OK for monochrome, not recommended for
color
HP Natural Tracing Paper OK for monochrome, but color for CAD
HP Vellum
raw
ngs on
y
HP Coated Paper OK
HP Heavyweight Coated Paper
HP Matte Film
HP Clear Film
HP High-Gloss White Film Not
recommended
OK for color;
not recommended for
monochrome
1
The limitation on the use of non-coated media for color really depends on:
D the amount of area fill in your drawing (the more there is, the less likely that
the print quality on opaque bond will be satisfactory),
D the quality of the media.
Working with media
Choosing media
MEDIA
2
Localization Note. .This page very similar to Loquillo UG p3–6. J: In Column 1, in the
same cell as HP Natural Tracing Paper, please add YHP Tracing Paper.
