A SERVICE OF

logo

Open as PDF
next previous
11. Slide the cutter (1) and media clips (2) out of the media path so that they can be accessed to cut the
printed media and to avoid damage to the leading edge of the media.
12. At the rear of the printer, lift the media lever (1).
13. If there is unequal pressure on the left (1) and right (2) edges of the media when feeding the media
into the printer, either reposition the media so that the pressure is equal at the edges or use the
pressure release lifters to equalize the pressure. . This will help avoid skew.
26 Chapter 3 How do I load/unload media ENWW
How do I load/unload media