(Continued)
■ To create a track name
Name each track.
A track’s name will be displayed whenever you select it and
during playback.
1 During playback, press the NAME/TOC EDIT button.
● “TRACK NAME” will appear.
2 Within 10 seconds, press the ENTER button.
● The unit will enter the character input mode.
● The track you are listening to will be played repeatedly.
3 Press the DISPLAY/CHARACTER button to select the type of
characters. (Page 26)
4 Select the character you want using the jog dial.
5 Press the ENTER button to enter the character.
● Repeat steps 3 to 5 above to enter characters in the name.
When the next character’s type is the same as the previous
character, step 3 can be skipped.
6 After entering all of the characters in the name, press the
NAME/TOC EDIT button.
● The track name will be recorded.
● The unit will return to normal playback.
Notes:
● This function cannot be used while in the program ("PRGM"
is lit: Page 13) or random play modes ("RANDOM" is lit: Page
12). First, cancel the program or random play mode before
trying to use this function.
● The track name function can be used while in the stop mode
(when selecting a track), in the pause mode, or in the record-
ing mode. (Select “TRACK NAME” from the edit menu.)
● If you create a track name while recording the track, make
sure you finish entering the name before you finish recording
the track.
If the end of the recording is reached before you have entered
the complete name, only the characters entered before the
recording ended will be recorded.
NAME/TOC EDIT
ENTER
DISPLAY/CHARACTER
TOC TRACK
TOTAL
1 2 3 4 5 6 7
8 9 10 11 12 13
15 16 17 18
14
1 2 3 4 5 6 7
8 9 10 11 12 13
15 16 17 18
14
TRACK
1 2 3 4 5 6 7
8 9 10 11 12 13
15 16 17 18
14
2
3
5
1
Track name recorded
(To name the first track)
6
4
(If you have selected capital letters)
(If you select “L”)
MD-R2
28
