A SERVICE OF

logo

Removing and replacing the diskette drive
1. Open the cover. See “Opening the cover” on page 138.
2. Slide the diskette drive lock1to the unlocked position.
3. Rotate the drive bay assembly upward.
4. Slide the drive towards the rear of the computer and remove the drive.
5. Disconnect the flat cable from the failing drive.
6. Connect the flat cable to the new drive.
7. Install the new drive from the rear of the drive bay assembly and lock the
drive into position.
8. To complete the installation, go to “Closing the cover and connecting cables”
on page 159.
Removing and replacing the fan assembly
1. Turn off the computer and disconnect the power cord from the electrical outlet
and from the computer.
2. Open the cover. See “Opening the cover” on page 138.
154 Hardware Maintenance Manual