A SERVICE OF

logo

Repair Information 4-23
5016-001
Fuser Unit
Fuser Unit Removal
1. Open the fuser door.
2. Loosen the two (2) lockdown screws and remove the fuser.
Fuser Lamp Removal
1. Remove the insulation heat cover (2 screws).
2. Remove right lamp terminal (1 screw).
3. Remove the fuser lamp.
Note: When the fuser lamp is reinstalled, the voltage/power
consumption marking should be facing the left side.
(Heat roller gear side).
Thermistor and Thermostat Removal
1. Remove the thermistor/thermostat mounting bracket (2 screws).
2. Remove the thermistor (1 screw).
3. Remove the thermostat (2 screws).