B-10 B-10
V350-PRO
Return to Section TOC Return to Section TOC Return to Section TOC Return to Section TOC
Return to Master TOC Return to Master TOC Return to Master TOC Return to Master TOC
AUXILIARY POWER
• 115VAC, 42VAC and 24VAC power is available from
the 14-pin MS-style connector. The Construction
model of the Invertec V350-Pro does not have the
14-pin MS-style connector) These supplies are
intended to supply power for auxiliary equipment like
wire feeders and the TIG Module.
• 115VAC supply is rated at 2 amps and is protected by a 3.5
amp breaker.
• 42 VAC supply is rated at 5.5 amps and is protected
by a 6 amp breaker.
• 24 VAC supply is rated at 5.5 amps and is protected
by a 6 amp breaker.
LIMITATIONS
• The V350-Pro is not recommended for processes
other than those listed.
• The V350-Pro can only be used with the recom-
mended equipment and options.
RECOMMENDED PROCESSES
Properly equipped, the Invertec V350-Pro supports
GMAW-P, FCAW, SMAW, GTAW and CAC-A
processes for a variety of materials, including mild
steel, stainless steel, cored wires, and aluminum.
OPERATION
