SPECIAL
CORD SET
INSTRUCTIONS
1.
A short power supply cord is provided to reduce the hazards resulting from becoming
entangled in or tripping over a longer cord.
2. An extension cord may be purchased and used
If
care is exercised in its use.
3.
If
an extension cord is used, the marked electrical rating of the extension cord must
be at least 10 amps and 120 volts. The resulting extended cord must be arranged so
that it will not drape over the counter top or table top where it can be pulled on by
children or tripped over accidentally.
Note:
This appliance
has a polarized plug (one blade i
s larger than
the other). As a
safety feature,
this
plug
will fit
In a polarized outlet only one way. If the plug
does not fully
fit
in the outlet, reverse the plug. If It
still
does not
fit,
contact a
qualified
electrician. Do not attempt to defeat
this
safety feature.
CAUTION:
1. Do not remove the
filter
holder at any tlme durlng the brewing process.
2. Do not let the pump run
with
an empty water container. This can damage
the pump permanently.
3. Use caution when removing
the
filter holder from the brew head. The
metal parts may
still
be very hot. Also, there may be hot water
floating
on
the top of the filter basket.
4. WHEN USING OR CLEANING THE FROTHING NOZZLE: Place a frothing
pitcher
or large cup (wllh a 16 ounce capacity) half full of water or milk
under the frothing nozzle. Make sure the
tip
of the frothing tube is
submerged In
liquid
before
turning
on the steam control knob.
Water
Spoon
3
