When the distance at which you want to shoot is predetermined, you
can set the focus in advance and wait until the photo opportunity
when autofocusing is difficult (see P. 70).
When you want to wait until the photo
opportunity comes, focus on the subject first
by using autofocus. Then press the PF button.
After making sure is blinking on the LCD
panel, press the shutter release button
when the photo opportunity comes.
Note: Manual focusing is possible using the
zoom buttons, but zooming cannot be
performed in the PF mode. To cancel the PF
mode, press the PF button again.
Note: There are two PF speeds, available for
manual focusing, functioning in the same
manner as the zoom.
Power Focus
52
comes. Manual focusing is possible in this mode, so PF can also be used
