AUTOFOCUS BEEP
While keeping the zoom
button depressed, press
the shutter release button
fully to take the picture.
When not required, the beep
can be overridden.
Press the drive and flash buttons
simultaneously to override the
beep. To reactivate it, press the
buttons again.
Note: If the shutter speed is faster than
1/3-sec., zoom exposure will
automatically be canceled, and the
camera will operate in the standard
Night Scene mode.
When overriding or reactivating the
beep, a confirmation beep is heard.
Note: When the power is switched off
and on again, the beep will be
functioning.
55
