Useful Information
For assistance, please visit http://www.panasonic.com/phonehelp 105
Troubleshooting
General use
Problem Cause & solution
The unit does not work. L Make sure that the battery is installed correctly and fully
charged (page 19).
L Check the connections (page 15 – 18).
L Unplug the base unit’s AC adaptor to reset the unit.
Reconnect the adaptor and try again.
L The handset has not been registered to the base unit.
Register the handset (page 77).
I cannot hear a dial tone. L Confirm that the telephone line cord is connected (page
16).
L Disconnect the base unit from the telephone line and
connect a known working telephone. If the working
telephone operates properly, contact our service
personnel to have the unit repaired. If the working
telephone does not operate properly, contact your
telephone company.
“Recharge battery” is
displayed and I cannot
perform the following
operations:
– taking a picture with the
handset camera
– erasing images or
editing a title while
viewing the stored
images
– taking a picture during
a video call or video
monitor
– recording or erasing a
customized ringer
– editing a title for a
customized ringer
– copying MULTI TALK V
USB Utility settings
(songs, images,
phonebook items,
programmable
settings, etc.) from your
computer
L The battery power is low. Fully charge the battery (page
19) and try again.
