F
Monitoring
For assistance, please visit http://www.panasonic.com/phonehelp 53
Monitoring feature
This feature allows you to monitor the
room where a unit is located. The
monitored unit does not ring, allowing you
to easily monitor a baby’s room, for
example, from different areas of the
house.
You can monitor:
– the sound in a room (“Audio monitor”,
page 53)
– the image and sound of a room (“Video
monitor using the handset”, page 54).
Note:
L You can place the handset on the
charger while monitoring using the
speakerphone.
Enabling monitoring access
Y o
To use the monitoring feature, you need to
set the destination unit to be monitored
beforehand.
–“Permit”: allows the unit to be
monitored.
–“Deny”: denies access from other units.
1 {MENU} (F2) i x i {SELECT}
2 “Monitor access” i {SELECT}
3 Select the desired setting. (Default:
“Deny”) i {SAVE} i {OFF}
1 {MENU} i h i {SET}
2 “Monitor access” i {SET}
3 Select the desired setting. (Default:
“Deny”) i {SET} i {STOP}
Audio monitor
This feature allows you to listen to the
audio in the room where the handset or
base unit is located.
Monitoring audio in the room
Y o
1 {MENU} (F2) i H i {SELECT}
2 “Audio only” i {SELECT}
3 Select the desired unit. i {SELECT}
L You can listen to the audio.
4 Press {OFF} to stop monitoring.
Note:
L To start monitoring quickly, press
{INTERCOM}, then press {*} instead
of steps 1 and 2.
1 {MENU} i F i {SET}
2 Select the desired unit. i {SET}
L You can listen to the audio.
3 Press {INTERCOM} to stop monitoring.
Note:
L To start monitoring quickly, press
{INTERCOM}, then press {*} instead
of step 1.
Handset
Base unit
Before using this feature, allow access
to the destination unit by selecting
“Permit” in the monitor access setting
(page 53).
Handset
Base unit
