5. Copier
41
– “Short → Long Edge”: For short edge
originals to long edge copies
– “Short → Short Edge”: For short edge
originals to short edge copies
4. {Set}
5. If necessary, enter the number of copies (page 37).
L Other copy settings are also available. See page
37 for details.
6. {Start}
7. After you finish copying, press {Stop} to reset this
feature.
Note:
L You can save the previous duplex setting (feature
#470 on page 73).
5.2.3 Quick ID copy feature / Easy repeat
feature (Scanner glass only)
Quick ID copy feature: To copy 2-sided documents
onto one page.
Easy repeat feature: To copy a single document
repeatedly onto one page.
Note:
L The copied documents will not be reduced to fit the
recording paper, and useful for copying small sized
documents such as business cards.
1 Press {V} or {^} repeatedly to select “Page
Layout”. i {<}/{>}
2 Press {V} or {^} repeatedly to select “Quick ID
Copy” or “Easy Repeat”. i {Set}
3 Press {V} or {^} repeatedly to select the desired
page layout.
Quick ID copy feature:
– “2 in 1 (Landscape)”
– “2 in 1 (Portrait)”
– “4 in 1 (Landscape)”
– “4 in 1 (Portrait)”
– “8 in 1 (Landscape)”
– “8 in 1 (Portrait)”
Easy repeat feature:
– “2 in 1”
– “4 in 1”
– “8 in 1”
4 Set the original (page 21).
L To make a landscape copy, set the original in
landscape direction. To make a portrait copy, set
the original in portrait direction.
L The scanning area changes according to the
selected setting in step 3. Follow the on-screen
instructions.
5 {Set}
6 If necessary, enter the number of copies (page 37).
L Other copy settings are also available. See page
37 for details.
7 Quick ID copy feature:
1. {Start}
L The unit will scan 1 page.
2. Place the next document on the scanner glass
and press {Set}. Repeat this until all the
documents are scanned.
L The unit will start copying.
L You can press {Start} anytime to start
copying.
Easy repeat feature:
{Start}
8 After you finish copying, press {Stop} to reset this
feature.
Note:
L You can save the previous page layout setting
(feature #467 on page 73).
5.2.4 Poster feature (Scanner glass only)
You can make copies divided into 4 (“2×2”) or 9 (“3×3”)
sections to make enlarged copies of the individual
sections. You can then glue them together to make a
poster.
1 Set the original (page 21).
2 Press {V} or {^} repeatedly to select “Page
Layout”. i {<}/{>}
3 Press {V} or {^} repeatedly to select “Poster”. i
{Set}
4 Press {V} or {^} repeatedly to select “2×2” or
“3×3”. i {Set}
5 If necessary, enter the number of copies (page 37).
L Other copy settings are also available. See page
37 for details.
6 {Start}
7 After you finish copying, press {Stop} to reset this
feature.
Note:
L You can save the previous page layout setting
(feature #467 on page 73).
5.2.5 N in 1 feature
You can save paper by copying 2, 4 or 8 pages onto 1
page. The documents will be reduced to fit the recording
paper.
1 Set the original (page 21).
L To make a portrait copy, set the original in portrait
direction. To make a landscape copy, set the
original in landscape direction.
2 Press {V} or {^} repeatedly to select “Page
Layout”. i {<}/{>}
