A1 SYSTEM FEATURES
196 Installation Manual
No Answer
Coverage Mode
Specifies how the calls will be handled when
Operator 1, 2 and/or 3 do not answer them
within the specified "Operator No Answer
Time". There are 4 options:
Caller Select
*1
—caller may leave a message
or call another extension.
Leave Message
*1
—caller may leave a
message in Operators’ mailbox.
Disconnect Message
*1
—caller is
disconnected from the VPS after hearing
"Thank you for calling."
Next Operator
*2
—caller is transferred to the
next operator (Operator 2 or 3) extension.
*1: Assignable for Operator 1, 2 and 3
*2: Assignable for Operator 1 and 2
• See "No Answer Coverage
Mode" in Table 5-6 in 5.4.3
Operator’s Parameters.
• See "No Answer Coverage
Mode" in Table B-12, Table B-13
and Table B-14 in B5.1
Automated Attendant
Parameters.
Operator Service Permits callers to request a live operator by
pressing [0] on the telephone keypad. Up to 3
operators can be specified to receive calls in
the Day, Night, Lunch and Break Modes.
• See 5.4.3 Operator’s
Parameters.
• See "Operator’s Parameters" in
B5.1 Automated Attendant
Parameters.
• See "Operator’s Extensions" in
D4 CUSTOMISING THE
MESSAGE MANAGER’S
MAILBOX.
Password
Administration
Allows the System Administrator or System
Manager to clear a subscriber password (so
that a new one can be assigned).
• See 5.5.4 Password Reset.
• See "Deleting a Mailbox
Password" in C2 SETTING UP
MAILBOXES.
PBX Integration Allows the VPS and PBX to work together as
an integrated unit. Two integration options
are available: Inband Integration and DPT
Integration.
• See 2.7 CONNECTIONS.
• See Section 3 INTEGRATING
THE VPS WITH PANASONIC
KX-T PHONE SYSTEMS.
• See Section 4 INTEGRATING
THE VPS WITH THE
PANASONIC KX-TD DIGITAL
PBX.
Table A-1
FEATURE DESCRIPTION REFERENCES
